三峡库区消落带农用坡地磷素径流流失特征

消落带是三峡库区重要的生态交错带，但自发农用和无序开发可能会造成更多的氮磷流失，进而加剧三峡库区水体富营养化。通过对库区连续3 a的定位监测（2011~2013年），研究了三峡库区消落带农用坡地的磷素流失特征。结果表明：次降雨事件中常规施肥处理的地表径流、壤中流总磷平均浓度分别为0.848±0.153、0.140±0.006 mg/L，其中地表径流中磷的形态以颗粒态为主，壤中流以溶解态的生物可利用磷为主。常规施肥下，地表径流、壤中流磷素年均流失通量分别为0.236±0.004、0.100±0.003 kg·hm 2，地表径流、壤中流磷素流失通量分别占总流失通量的70.2%、29.8%，地表径流是坡地磷素流失的主要途径，但壤中流也是不可忽视的重要途径。与常规施肥处理相比，减量施肥处理地表径流、壤中流磷素流失量分别降低了45.3%、40.0%。建议采取减量施肥的方式，以降低营养盐负荷，保护水环境。     

Numerical simulation of far-field blast loads arising from large TNT equivalent explosives

Large TNT equivalent explosions usually arise from accidents occurring during the transportation, storage, and manufacturing of chemicals relevant to process industries. The blast wave generated by the explosion will spread and interact with the surrounding factories and storehouses, damaging the building structures within several kilometers and causing significant casualties and property losses. This study aims to develop an efficient numerical simulation method to predict blast loads to estimate the consequences of accidents involving far-field free air bursts or surface burst explosions. Before its interaction with the interested target, a blast wave is generated in the numerical model by specifying the initial and boundary conditions of the disturbed air. Based on empirical data of incident overpressure, an explicit formula to calculate the air particle velocity is derived from the governing equations of a perfect inviscid gas. A simplified path line method is proposed to calculate the air density. The proposed method is applied to the LS-DYNA CESE solver to simulate the blast loads on building structures in the far field. Validations against empirical data and experiments indicate that the proposed method is sufficiently accurate for engineering applications and, through a case study, presents a more efficient performance than the LOAD_BLAST_ENHANCED (LBE) and mapping methods.     

HUD状态下飞行员视觉注意资源分配机制研究

为了解决平视显示器（Head Up Display,HUD）飞行中的注意资源分配问题，基于飞行模拟器，设计双作业飞行任务开展相关研究。基于事件相关电位（Event Related Potential，ERP）技术，选取行为绩效和P300成分为评价指标，采用oddball模式，在双作业飞行任务条件下开展实验研究。结果表明:随主任务难度的增加，主、辅任务的作业绩效均显著下降，被试者对HUD上异常信息的正确操作率降低，且反应时间延长；随主任务难度的增加，由辅任务所诱发的P300的波幅显著降低。在实验结果的基础上，最终提出了HUD状态下飞行员视觉注意资源分配机制。     

移动式环保公厕车防震抗风安全性研究

移动式环保公厕车工作地点范围广、环境复杂,且没有地基固定,要求其具有特别高的抗地震能力、抗风载变形能力。利用有限元仿真的方法,研究了移动式环保公厕车在不同地震载荷、风力载荷条件下的变形和应力状况,分析了地震载荷和风力载荷对移动式环保公厕车破坏程度和破坏机理,对比了单一载荷作用与复合载荷作用的区别,从而为移动式环保公厕车使用环境的选择、安全检查的合理安排等提供有力的参考依据。     

萃取法分离回收不锈钢酸洗污泥硫酸浸出液中的重金属

采用非皂化P204和皂化P204萃取剂对不锈钢酸洗污泥的硫酸浸出液进行萃取。在浸出液pH为0.80、非皂化P204体积分数为25%、萃取剂与浸出液体积比为1∶2、萃取时间为5 min的条件下,Fe~(3+)萃取率达99.64%,Cr~(3+)和Ni~(2+)萃取率为3.98%和6.99%,一次萃余液pH为0.64。采用皂化P204对除Fe~(3+)后的一次萃余液进行萃取,在P204体积分数为25%、萃取剂与浸出液体积比为1∶2、萃取剂皂化率为60%、一次萃余液pH为1.50、萃取时间为5 min的条件下,Ni~(2+)萃取率为93.12%,Cr~(3+)萃取率为20.69%,二次萃余液pH为2.63。     

冲击载荷下各向异性煤体渗透-应力敏感性试验研究*

为揭示冲击煤样渗透率的变化规律，通过立式分离式霍普金森（SHPB）冲击装置对不同层理方向煤样进行动态冲击，进而采用渗透仪对冲击后的煤样进行渗透率测试，分析不同冲击荷载下煤岩的渗透率及应力敏感性。结果表明:冲击煤样的渗透率远大于原煤样品，冲击载荷越大，渗透率越大；在相同的冲击载荷和气体压力下，平行于层理方向的煤样渗透率最大，其次是斜交45°层理方向的煤样渗透率，垂直于层理方向的煤样渗透率最小；渗透率受有效应力影响显著；在冲击荷载的作用下，垂直于层理方向煤样渗透率的变化率对孔隙压力更为敏感。     

基于疲劳累积破坏机制的储罐结构动力可靠度分析

针对随机风载荷作用下储罐结构动力可靠性问题，以300 m3的中小型立式低温储罐为研究对象，利用AR模型进行数值模拟得到风载荷的脉动风速时程与脉动功率谱密度函数。采用ANSYS建立储罐三维有限元模型，并对储罐进行动力学分析，计算出储罐结构的随机响应，进而求出随机风载荷作用下储罐结构动力可靠性所需全部数字特征，最后利用疲劳累积损伤机制计算得到储罐的动力可靠度。结果表明:假设结构强度不随时间退化，前5 a动力可靠度基本保持不变，随着使用年限的延长，动力可靠度下降速度明显增大。研究方法可为储罐的动力可靠性及寿命预测提供一定的理论依据。     

人工湿地净化海水养殖外排水影响因素与效果实验研究

以海水养殖外排水为处理对象,构建芦苇复合垂直流人工湿地模拟系统进行处理效果的影响因素(盐度,水力负荷,污染负荷)实验。植物选择芦苇,种植密度为48株/m2,基质填料选择细纱、蛭石、高炉矿渣、沸石和砾石。实验结果显示,随着盐度的升高,人工湿地对CODMn和NH4-N的去除率差异不显著(P>0.05),对PO4-P的去除率在逐渐降低,变化显著(P<0.05),但芦苇表现出较强的耐盐性,在盐度20时生长良好。随着水力负荷的增加,人工湿地对CODMn、NH4-N和PO4-P的去除率呈现出降低的趋势,变化显著(P<0.05);而当污染负荷增加时,去除率呈现出先增加后降低的趋势。综合考虑运行合理性及运行效果,得出合理工况为盐度20,水力负荷0.4 m3/(m2.d),污染负荷CODMn 10 mg/L,NH4-N 2 mg/L,PO4-P 0.5 mg/L。在此工况下,系统稳定运行2个月,显示人工湿地对海水养殖外排水中的污染物具有较好的去除效果。     

等标污染负荷法评价炼油污水污染源及分质治理

应用等标污染负荷法,以GB8978-1996一级标准作为评价标准,对某炼化企业各生产装置所排污水进行评价,分析主要污染源排污口和主要污染物,并提出分质治理建议。     

Three-dimensional hydrodynamic and water quality model for TMDL development of Lake Fuxian, China

Lake Fuxian is the largest deep freshwater lake in China. Although its average water quality meets Class I of the China National Water Quality Standard (CNWQS), i.e., GB3838-2002, monitoring data indicate that the water quality approaches the Class II threshold in some areas. Thus it is urgent to reduce the watershed load through the total maximum daily load (TMDL) program. A three-dimensional hydrodynamic and water quality model was developed for Lake Fuxian, simulating flow circulation and pollutant fate and transport. The model development process consists of several steps, including grid generation, initial and boundary condition configurations, and model calibration processes. The model accurately reproduced the observed water surface elevation, spatiotemporal variations in temperature, and total nitrogen (TN), total phosphorus (TP), and chemical oxygen demand (COD) concentrations, suggesting a reasonable numerical representation of the prototype system for further TMDL analyses. The TMDL was calculated using two interpretations of the water quality standards for Class I of the CNWQS based on the maximum instantaneous surface and annual average surface water concentrations. Analysis of the first scenario indicated that the TN, TP and COD loads should be reduced by 66%, 68% and 57%, respectively. Water quality was the highest priority; however, local economic development and cost feasibility for load reduction can pose significant issues. In the second interpretation, the model results showed that, under the existing conditions, the average water quality meets the Class I standard and therefore load reduction is unnecessary. Future studies are needed to conduct risk and cost assessments for realistic decision-making.